Note that the Cyclades and Stallion multi serial port drivers do not need this driver built in for them to work. It can also mean the UART has a buggy implementation, but that’s probably not what’s going on here. Automatically generated in year with gen-web-lkddb. SE to chase the low-level parts. This page is automaticly generated with free libre, open software lkddb see lkddb-sources. Email Required, but never shown. Linux requires a new x86 chip type for the Vortex86DX.
|Date Added:||27 February 2017|
|File Size:||62.96 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The datasheet for the CPU doesn’t say much. These modems are crippled and require proprietary drivers which are only available under Windows. Any help would be appreciated at this point! The kernel still does the same autoconfig and scanning as setserial does.
Home Questions Tags Users Unanswered. You’ve run into the limits of the “Linux” part of the problem, so I suggest you re-post this question on electronics. If you intend to use a software modem also called Winmodem under Linux, forget it. Sign up using Email and Password. An attempt to do a setserial autoconfig fails with: Nope, setserial doesn’t work.
This limitation may be lifted in the future. If you have a mouseman serial mouse which is not recognized by the X window system, try running gpm first.
Possibly there’s a problem in my driver, but it all looks fairly straight forward how I am supposed to add a basic compatible device. Now I’m working on getting the Linux part working. It appears there is nothing there.
Getting serial ports to work on Linux
Ilnux people will say Y or M here, so that they can use serial mice, modems and similar devices connecting to the standard serial ports. I wrote a PCI utility that wrote to this bit, but it didn’t seem to enable the COM port or change anything when I did the io port probing.
Post as a guest Name. What I’ve done so far: The programming guide on the page you point to is near-useless for answering this, but maybe you’ll get lucky and find someone who has programmed this SoC before.
I’ve since got the UART part working.
Which is what the kernel fails with as well. Do not compile this driver as a module if you are using non-standard serial ports, since the configuration information will be lost when the driver 1655a unloaded.
It can also mean the UART has a buggy implementation, but that’s probably not what’s going on here. Linux requires a new x86 chip type for the Vortex86DX. Linux detects my COM9 as ttyS4 in dmesg.
Getting serial ports to work on Linux | Marcos Placona’s Blog
This selects whether you want to include the driver for the standard serial ports. The setserial 8 program should be able to configure it for you. The standard answer is Y.